Subscribe to Our Youtube Channel
Related Manuals for Telestream PRISM MPI2-RACK-MD
Summary of Contents for Telestream PRISM MPI2-RACK-MD
- Page 1 PRISM MPI2-RACK-MD Extended Touch Display with Rack Cabinet Installation and Safety Instructions www.telestream.net 071-3728-00...
- Page 2 Copyright © 2020 Telestream, LLC and its Affiliates. All rights reserved. Telestream products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TELESTREAM is a registered trademark of Telestream, LLC. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
- Page 3 Telestream, with shipping charges prepaid. Telestream shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Telestream service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
- Page 4 TELESTREAM SALES OFFICE.) DEFINITIONS. "Telestream" means Telestream, LLC, a Delaware limited liability company, and its Affiliates , or the local Telestream legal entity that is supplying the equipment. "Program" means the Telestream software product (executable program and/or data) enclosed with this Agreement or included within the equipment with which this Agreement is packed.
- Page 5 The license granted herein is effective upon acceptance by Customer, and shall remain in effect until terminated as provided herein. The license may be terminated by Customer at any time upon written notice to Telestream. The license may be terminated by Telestream or any third party from whom Telestream may have obtained a respective licensing right if Customer fails to comply with any term or condition and such failure is not remedied within thirty (30) days after notice hereof from Telestream or such third party.
-
Page 7: Table Of Contents
Accessories ....................................2 Operating requirements ................................3 Rear panel connectors ................................5 Equipment rack installation ................................ 6 Power-on and power-off procedures ............................11 Operation ......................................13 Extending the PRISM waveform monitor display ........................13 PRISM MPI2-RACK-MD Installation and Safety Instructions... -
Page 8: Important Compliance And Safety Information
Canada. Cet appareil numerique de la Classe A est conforme a la norme NMB-003 du Canada. Safety CAN/CSA-22.2 NO. 61010-1-12 + Gil + Gl2:: Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements. PRISM MPI2-RACK-MD Installation and Safety Instructions... - Page 9 Notes: For Compliance with the EMC standards listed here, high quality shielded interface cables should be used. Emissions which exceed the levels required by this standard may occur when this equipment is PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 10 This product is classified as an industrial monitoring and control instrument, and is not required to comply with the substance restrictions of the RoHS 3 Directives 2011 /65/EU and EU 2015/863 until July 22, 2021. This product does, however, comply with the RoHS 2 Directive 2011/65/EU. Korea Compliance Statement PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 11 When incorporating this equipment into a system, the safety of that system is the responsibility of the assembler of the system. PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 12 Provide a safe working environment: Always place the product in a location convenient for viewing the display and indicators. Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional to avoid stress injuries. Use only the Telestream rackmount hardware specified for this product. PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 13 Carefully read all instructions. Retain these instructions for future reference. Comply with local and national safety codes. For correct and safe operation of the product, it is essential that you follow PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 14 To minimize the risk of damage to the module, it is strongly recommended that the power CAUTION. cord be connected to the module before the power cord is connected to the AC power source. viii PRISM MPI2-RACK-MD Installation and Safety Instructions...
-
Page 15: Preface
The touch display extends the functionality of the MPI2 product by providing an additional full HD application tile. The additional tile supports several different monitoring applications, including picture, trace, audio, and status. The PRISM MPI2-RACK-MD rack cabinet is 19 inches wide and comes with a USB/Headphone connector on the rack ear. - Page 16 Searching for documents on www.telestream.net/video/resources.htm. 1. Go to the Telestream website: telestream.net/video/resources.htm#Literature. 2. Scroll to the “Literature” topic and click on the “Prism” category. 3. Scroll down and find the Manual or document you need. Next to each title, you can part number, document type and release date.
-
Page 17: Installation
(See Accessories.) 3. Remove the PRISM MPI2-RACK-MD from the shipping cartons, and then check that the extended touch display with rack cabinet has not been damaged in transit. Prior to shipment the items are thoroughly inspected for mechanical defects. -
Page 18: Accessories
When ordering the A99 option, it is the responsibility of the end user to ensure that a certified power cord, for the country or region it is installed, is used with this module. To reduce risk of fire and shock, use the certified power cord provided with the product. CAUTION. PRISM MPI2-RACK-MD Installation and Safety Instructions... -
Page 19: Operating Requirements
To ensure proper airflow, there must be at least 2 inches of clearance on both sides of Instrument the instrument, at least 2 inches of clearance from the rear of the instrument, and at least a 1/2 inch of clearance from the top of the instrument. PRISM MPI2-RACK-MD Installation and Safety Instructions... - Page 20 Table 3: Extended touch display physical characteristics Parameter Description Dimensions Height 13.72 cm (5.4 in.) Width 21.84 cm (8.6 in.), includes bezel Depth 11.18 cm (4.4 in.), includes bezel Weight 1.59 kg (3.5 lbs.) Shipping 3.57 (7.87 lbs.) PRISM MPI2-RACK-MD Installation and Safety Instructions...
-
Page 21: Rear Panel Connectors
USB B port. A USB 3.0 port for connecting to a PRISM waveform monitor for touchscreen operation. USB A ports. Currently not enabled. Do not make connections to these ports. Headphone jack. Currently not enabled. Do not make connections to this port. PRISM MPI2-RACK-MD Installation and Safety Instructions... -
Page 22: Equipment Rack Installation
Phillips or PoziDriv-driver tip for #2 size screw heads T-10 TORX tip Used for removing instrument screws. TORX-driver bit for T-10 size screw heads. T-15 TORX tip Used for removing instrument screws. TORX-driver bit for T-10 size screw heads. PRISM MPI2-RACK-MD Installation and Safety Instructions... - Page 23 WASHER; SHOULDER & RETAINER, 0.195 ID X 0.195 THK, PLASTIC, TV GRAY, 6.575 OD 212-0591-XX SCREW, MACHINE; 10-32 X 0.750 OVAL HEAD, POZI Guide bracket 407-3752-XX BRACKET, EXT; 2.5 X 8.06 X 0.06, STEEL; SAFETY CONTROLLED Figure 2: MPI2-RACK-MD parts diagram PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 24 6. Repeat steps 5 and 6 to install the second guide bracket to the other side of the cabinet. 7. Tighten all of the attaching screws that were left loose in the previous steps. Figure 3: Adjusting the handle brackets and installing the guide brackets PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 25 Connect signal and Ethernet cables to the instrument as needed. See the PRISM MPI2 Installation and Safety Instructions manual for information about making signal connections to the instrument. e. Connect the power cable to the instrument. (See Power cord installation.) PRISM MPI2-RACK-MD Installation and Safety Instructions...
- Page 26 Connect the power cable to the extended touch display. (See Power cord installation.) Figure 5: Connecting the cabinet USB and audio cables (use any USB port) Figure 6: Connect the PRISM waveform monitor to the extended touch display PRISM MPI2-RACK-MD Installation and Safety Instructions...
-
Page 27: Power-On And Power-Off Procedures
CAUTION. To minimize the risk of damage to the module, it is strongly recommended that the power cord be connected to the module before the power cord is connected to the AC power source. PRISM MPI2-RACK-MD Installation and Safety Instructions... - Page 28 2. To completely remove power from the module, disconnect the power cord from each module. The power cord has a locking mechanism to keep it attached to each module. Push the button on the cord housing to release the locking mechanism. PRISM MPI2-RACK-MD Installation and Safety Instructions...
-
Page 29: Operation
For example, if you change the USB port connections on the back of the MPI2 instrument. Figure 7: Extended display mode configuration PRISM MPI2-RACK-MD Installation and Safety Instructions...
Need help?
Do you have a question about the PRISM MPI2-RACK-MD and is the answer not in the manual?
Questions and answers