Low Battery Warning
When the Batteries become weak, you will hear an audible
warning. Be sure to replace Alkaline Batteries as soon as
possible, or you can recharge Nickel-Cadmium Batteries while
they are installed in the scanner.
Replacing the Batteries
See page six.
Location
n
If strong interference or electrical noise is received,
relocate the scanner or its antenna away from the
source of the noise. A higher elevation, if possible, may
provide better reception.
n
Do not use the scanner in high-moisture environments
such as the kitchen or bathroom.
n
Avoid placing the unit in direct sunlight or near heating
elements or vents.
Cleaning
n
Disconnect the power to the unit before cleaning.
n
Clean the outside of the scanner with a mild detergent.
n
To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
n
Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no user
serviceable parts. Contact the Uniden Customer Service
Center or take it to a qualified repair technician.
Proper Care of Your Scanner
n
Use only the AC Adapter/Charger that came with your
scanner.
n
Avoid placing the scanner in direct sunlight or near
heating elements or vents.
n
Do not subject the scanner to extremes in temperature.
If the scanner is exposed to temperatures below 14°F or
above 140°F, the liquid crystal display may temporarily
cease to function properly, or can become permanently
damaged.
Care and Maintenance
20