Chapter 1: Hyperwire™ Card - Aerotech AUTOMATION1-HyperWire Hardware Manual

HyperWire Card Hardware Manual
Chapter 1: HyperWire™ Card
The HyperWire bus is the high-speed communications connection to the HyperWire Card operating at 2
gigabits per second. The PC sends all command and configuration information through the HyperWire bus.
The driver for the HyperWire™ card is installed with the software. You can install the software before or after
you install the HyperWire card.
* Refer to Installing the Software in the Getting Started section in the Help.
† Refer to Installing the FireWiire or HyperWire card in the Getting Started section in the Help.
‡ Refer to the hardware manual for your drive.
§ Launch the Configuration Manager to access the Drive Configuration tool.
If you want to operate without a HyperWire card, refer to the Operation without a FireWire or HyperWire
Card section of FireWire or HyperWire Card Options in the Helpfile. To install a HyperWire card, use the
procedure in Installation.
www.aerotech.com
Chapter 1: HyperWire™ Card
7