Setting Channel Priority (Conventional Channels Only) - Uniden BC246T Owner's Manual

2. Press then rotate the scroll control once to
Func
select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
channel name. Then press E or press down on the
scroll control to accept the setting.
Hints:
• Each channel name can be up to 16 characters.
Abbreviate as necessary to fit.
• The channel name appears on the second line of the
display when the scanner stops on a channel.
• If you do not enter a channel name, the scanner dis-
plays the frequency (for conventional systems) or the
talk group ID (for trunked systems) when it stops on a
channel.
• Press twice to delete the current character.
• Press three times to clear the entire alpha tag.
• Channel names take up extra memory. To maximize
channels, use channel names only where necessary.
Setting Channel Priority
(Conventional Channels Only)
Program SysteMS
Menu
Select the system
E
Edit Group
Select the group
E
Edit Channel
Select the channel
E
Set Priority
This setting controls whether the scanner treats the chan-
nel as a priority channel while scanning. Select your set-
ting, then press E.
On - when you turn on the Priority feature, the channel will
be scanned every 2 seconds. P appears at the end of the
default name.
Programming/Editing Optional Settings
E
E
E
E
72