Table of Contents
Advertisement
Connecting the Range Adjustment Control Board:
Connecting the Range Adjustment Control Board:
Step 9: Connect the YELLO
Step 9:
Connect the YELLOW wire
control board using one o the WIRE NUTS provided.
control board using one o the WIRE NUTS provided.
Step 10 : Connect the BLACK wire rom the Range Adjustment control board to the BLACK BATTERY
Step 10
: Connect the BLACK wire rom the Range Adjustment control board to the BLACK BATTERY
CONNECTOR wire (provided), along with the SHIELD wire rom the SENSOR C ABLE (see Step 13 below).
CONNECTOR wire (provided), along with the SHIELD wire rom the SENSOR C
BLACK BATTERY
BLACK BATTERY
CONNECTOR wire provided
CONNECTOR wire provided
Step 11 : Secure
Step 11
: Secure the RANGE ADJUSTMENT CONTR
the RANGE ADJUSTMENT CONTROL BOARD inside the gate
control box has slots on both sides o
control box has slots on both sides o the top battery compartment or extra control boards, or you
optional mounting hole.
optional mounting hole.
IMPORTANT:
IMPORTANT: DO NOT let exposed wiring or components on the control board make contact with other exposed
DO NOT let exposed wiring or components on the control board make contact with other exposed
wiring or components.
wiring or components.
The Range Adjustment Control Board
The Range Adjustment Control Board
can be mounted in slots on either side of
can be mounted in slots on either side of
top battery compartment
top battery compartment
ing hole beneath battery compartment.
ing hole beneath battery compartment.
Mighty Mule FM500 & FM502 Control Box
Mighty Mule FM500 & FM502 Control Box
Power supply connection:
Power supply connection:
Step 12: Connect the RED and BLACK control board wires rom the
Step 12:
Connect the RED and BLACK control board wires rom the opener to the DOUBLE SPADE
CONNECTORS (provided) as shown on the next page.
CONNECTORS (provided) as shown on the next
Step 13:
Step 13: Using a WIRE NUT
Using a WIRE NUT, connect the SHIELD wire
wire rom the Range Adjustment board) to the BLACK BATTERY CONNECTION wire provided. Using the
wire rom the Range Adjustment board) to the BLACK BATTERY CONNECTION wire provided. Using the
remaining WIRE NUT connect the RED wire rom the SENSOR CABLE to the RED BATTERY CONNECTION
remaining WIRE NUT connect the RED wire rom the SENSOR CABLE to the RED BATTERY CONNECTION
wire provided.
wire provided.
Step 14:
Step 14: Connect these wires to the DOUBLE SPADE CONNECTORS as shown.
Connect these wires to the DOUBLE SPADE CONNECTORS as shown.
IMPORTANT:
IMPORTANT: Be sure to connect both RED leads to the
Be sure to connect both RED leads to the same
BLACK leads to the
BLACK leads to the other
other DOUBLE SPADE CONNECTOR.
CONNECTORS to the battery in the next step.
CONNECTORS to the battery in the next step.
W wire rom the
rom the SENSOR CABLE
SENSOR CABLE to the YELLO
Optional Mounting Hole
Optional Mounting Hole
Potentiometer (POT)
Potentiometer (POT)
Wire Nut
Wire Nut
BLACK
BLACK
the top battery compartment or extra control boards, or you can use the
OR
OR
the mount-
the mount-
page.
, connect the SHIELD wire rom the SENSOR CABLE (along with the
DOUBLE SPADE CONNECTOR. You will connect the DOUBLE SPADE
to the YELLOW wire
Range Adjustment
Range Adjustment
Control Board
Control Board
M I I N
M
N
M A A X
M
X
YELLOW
YELLOW
from SENSOR Cable
from SENSOR Cable
OL BOARD inside the gate opener control box. The
The Range Adjustment Control Board
The Range Adjustment Control Board
can be mounted in the slot at the bottom
can be mounted in the slot at the bottom
OR
OR
the slot at the bottom right. Both are
the slot at the bottom right. Both are
located beneath the circuit board.
located beneath the circuit board.
Mighty Mule FM700 & FM702 Control Box
Mighty Mule FM700 & FM702 Control Box
opener to the DOUBLE SPADE
rom the SENSOR CABLE (along with the BLACK
same DOUBLE SPADE CONNECTOR and both
DOUBLE SPADE CONNECTOR and both
You will connect the DOUBLE SPADE
5 5
W wire rom the
rom the Range Adjustmen
Range Adjustment t
ABLE (see Step 13 below).
Wire Nut
Wire Nut
YELLOW wire
YELLOW wire
opener control box. The
can use the
BLACK
Advertisement
Table of Contents
