Invacare Fox Service Manual page 20

Invacare® Fox
Component
Wheel suspension and
wheels
Swinging axle
Drive units, coupling
mechanism
Legrests
Powered legrests (if
installed)
Lighting (if installed)
Batteries
Battery case
Remote / electronics
module
20
Check Remedy
Check drive wheels for Adjust, replace wheel
tight fit and side play hubs
Check steering wheels Replace wheels, wheel
for tight fit, float and fork or wheel bearings
side play
Check castor locks Replace castor locks
Checking swinging axle Replacing swinging
for damage axle
Check functions in Replace motor if
drive and push modes necessary
Check coupling
Tighten screws / nuts,
mechanism
adjust or replace if
necessary
Check welded seams, Tighten, replace if
interlocking, screws, necessary
foot-plates
Check cable Replace cable if
necessary
Check contacts
Check functions
Check cable Replace lamp or cable
if necessary
Check function
Check batteries for Replace batteries, if
damage necessary
Check battery voltage Charge batteries
Check contacts and Clean contacts and
terminals terminals
Check locking system, Replace if necessary
it must engage
completely
Remote, status display
Evaluate error / blink
blinking
code
Fixings
Tighten fixings, replace
if necessary
Cables and connecting Tighten cables and
plugs connecting plugs,
replace if necessary
Drive lever function Replace drive lever if
necessary
Replace remote if
necessary
Power supply Tighten cables and
connecting plugs.
Replace, if necessary
Notes
See 7.9 Wheels, page
31
See 7.9.12 Replacing
Steering Head
Bearings on Steering
Wheels, page 43
See 7.5.2 Replacing
/ Reversing Swinging
Axle, page 22
See user manual
See user manual
Refer to safety
information in 7.8.5
Handling Damaged
Batteries Correctly,
page 30 for handling
batteries
1577880-D