Group Scan (Gs) Mode; Programming Scan Channels - Uniden UH089sx Owner's Manual

UNIDEN Model uh089sx UHF CB Radio
Operation

Group Scan (GS) Mode

Allows you to monitor a Priority (Instant) Channel
while scanning (Instant Priority channel see p. 11)
To use GS Mode Scanning, press
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes
active the radio will stay on that
channel for as long as the signal is
present. If the received signal
ceases, Priority Scanning continues
after 3 seconds.
If scanning stops on a channel
which is not a Priority Channel,
uh089sx will continue monitoring
the Priority Channel for activity
while listening to the active one.
To deactivate SCAN, press the
microphone.
If SCAN is deactivated while it is tuned to an active channel, the uh089sx will
stay on that active channel.
If none of the channels are active, the uh089sx will reinstate the scan start
channel.
If OS/GS Scanning is initiated when there are no channels programmed in
OS/GS memory, an error tone will be heard and scanning will not start (see
Programming Scan Channels - below).

Programming Scan Channels

Select which Scanning Mode you
wish to use - OS or GS.
Select the channel you want to
store.
Press to store. MEM icon
appears and a short tone beep is
heard.
To remove the channel from
Memory, press once more.
The MEM icon disappears.
. GS icon appears on the display.
MENU
ENTER
button or the PTT button on the
MENU
ENTER
9
MON
DCS/CTCSS
MON
DCS/CTCSS