Table of Contents
Advertisement
Quick Links
IMPORTANT – RETAIN FOR FUTURE REFERENCE – READ CAREFULLY
•
Try to position your fountain above or near an electrical outlet.
•
When considering the location of your fountain, please consider making it easily accessible for maintenance (e.g.
adding water, cleaning etc.). Avoid delicate surfaces that could be damaged by splashing.
•
Consider the surface on which your waterfall will be placed. This feature can be mounted on sheetrock with
wood studs, tile, brick or concrete. (No mounting hardware is included for masonry installations). Due to the
weight of this fountain, it is necessary to mount directly into at least one wood stud. You MUST use the provided
EZ Anchors™ (J) for any screw that does not hit a stud.
•
Mount indoors only. It is not recommended to place your fountain in direct sunlight.
•
** It is critical that your waterfall is level as this will ensure even water flow. **
•
Assemble as near as possible to the point of installation. Take extreme care when lifting to avoid
personal injury or damage to the product.
•
This product contains small items and plastic bags. Please be aware of the danger to young children.
•
Assistance in mounting your fountain is required. You will need 2-3 people.
635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax 407-426-7721
CLASSIC QUARRY NOJOQUI
& HORIZON FALLS
Installation Manual
Page 1 of 8
Advertisement
Table of Contents
Related Manuals for Bluworld Classic Quarry Nojoqui
Summary of Contents for Bluworld Classic Quarry Nojoqui
- Page 1 CLASSIC QUARRY NOJOQUI & HORIZON FALLS Installation Manual IMPORTANT – RETAIN FOR FUTURE REFERENCE – READ CAREFULLY • Try to position your fountain above or near an electrical outlet. • When considering the location of your fountain, please consider making it easily accessible for maintenance (e.g.
-
Page 2: Parts List
Parts List Not Shown - Classic Quarry Stone A. Bracket Template 1 each B. Stone Wall Bracket 1 each C. Remote 1 each D. Reservoir Wall Bracket 1 each E. Water Disperser 1 each F. Water Diffuser 1 each G. Trim Kit (your color may be different) 1 H. -
Page 3: Section 2: Mounting The Wall Brackets
Section 2: Mounting the Wall Brackets 1. Your Nojoqui Falls fountain is 58” tall x 25.5” wide the Horizon Falls fountain is 33” tall x 51” wide. Determine where on the wall the fountain will be mounted. You may wish to block out the dimensions with low tack or painters masking tape for reference. -
Page 4: Section 3: Mounting The Reservoir And Water Disperser
Section 3: Mounting the Reservoir and Water Disperser 1. Locate the reservoir (L) and the EVA Cushion Strips (O). Peal the paper off the adhesive strip and place each pad about 1” up from the bottom of the reservoir and 2” in from each side as shown in the drawing (Fig 3.1). 2. -
Page 5: Section 5: Setting The Disperser And Diffuser
2. It is a good idea to have someone spot you on the position of the bracket and to see if you are centered or not inside the basin. Lift the stone up just past the mounting cleat and tip the top back so it is just under the disperser (E) and then tilt the bottom back towards the wall clearing the reservoir lip. -
Page 6: Section 7: Installing The Light Kit
Section 7: Installing the Light Kit 1. Carefully unwrap the LED light bar (K). Take care in handling so that the LED strips and connections to transformers are not disturbed. Remove the tie from the electrical cord. 2. Place the LED light bar (K) inside the header (G) with the LED strip facing down (Fig 7.1). - Page 7 RF Wireless Touching LED Remote Controller (Color Adjusting) 1. Technical Parameters (remote control): • Power supply: AAA battery*3pcs • Working voltage: DC 12V/24V • Cover material: ABS • Fabrication processing: multicolor printing & UV varnish • Output control: 3circuits (R/G/B) •...
-
Page 8: Warranty
Bluworld, then the Warranty shall be null and void.
Need help?
Do you have a question about the Classic Quarry Nojoqui and is the answer not in the manual?
Questions and answers