Rear Panel Connections And Controls Pa240 - Arcam HDA PA720 Handbook

Rear Panel Connections and Controls PA240

BALANCED XLR AUDIO INPUTS
Connect the XLR outputs of your pre-
amplifier.
See "Connecting Sources and
Loudspeakers" on page EN-13.
INR INL
OUTR OUTL
+
R
4-16 OHMS. CLASS 2 WIRING
PRE-AMPLIFIER INPUTS SPEAKER TERMINALS
Connect the phono outputs of your See "Connecting Sources
pre-amplifier. and Loudspeakers" on
See "Connecting Sources and
Loudspeakers" on page EN-13.
PRE-AMPLIFIER OUTPUT
OUTL and OUTR provide a copy of
the signal applied to the IN L and IN
R phono sockets only, not the XLR.
Note: This is a passive output,
no additional filtering or
amplification is applied.
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 8 00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 8
INPUT SWITCHES
Allow the PA240 to be configured in
different operational modes.
See "Connecting Sources and
Loudspeakers" on page EN-13.
INR INL
GAIN INPUT
25dB 31dB XLR
RCA ST BRIDGE DM
- -
+
L
RS232
This connection allows for remote control
from a third-party home automation
page EN-13. system or computer.
See "Network and RS232" on page EN-10.
Trigger IN allows the PA240 to be turned on or off by an external source.
USB Trigger OUT allows the PA240 to control the power state of other connected
For software upgrades only.
See "USB" on page EN-10.
TRIGGER IN
USB
5V
MODE RS232 NET 100mA
TRIGGER OUT
(12V 100mA)
NETWORK
This connection allows for remote control
from a third-party home automation system or
computer.
See "Network and RS232" on page EN-10.
EN-8
TRIGGER IN / OUT
equipment
See "Trigger IN/OUT" on page EN-10.
POWER INLET
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V ~
110-120V/220-240V~
230 = 220 - 240V ~
50/60Hz 1.5kW MAX
POWER INLET VOLTAGE SELECT
Connect the correct mains cable Ensure that the voltage
here. selected matches the local
power supply.
Please read the sections "Placing The Unit",
"Power" and "Interconnect Cables" on page
EN-6 before connecting
amplifier!
your PA240
29/01/2020 13:11:33 29/01/2020 13:11:33