Liquid Damage - Uniden WIN1200 Series Owner's Manual

Liquid Damage

Moisture and liquid can damage your cordless phone.
• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off
the liquid, and use as normal.
If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered
•
the handset battery compartment or vent openings on the base), follow the steps below:
Handset
1. Remove the battery cover and leave it off for ventilation.
2. Disconnect the battery pack. Leave the battery cover off and
the battery pack disconnected for at least 3 days.
3. Once the handset is completely dry, reconnect the battery
pack and the battery cover.
4. Recharge the handset's battery pack for 15 hours before
using.
IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the
handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please
visit our website at www.uniden.com.au
customer support.
(for Australian model) or www.uniden.co.nz
56
Base
1. Disconnect the AC adaptor from the
base.
2. Disconnect the telephone cord and the
USB cable from the base.
3. Let dry for at least 3 days.
(for New Zealand model) for