Setting The Date And Time; Activating Name Tagging - Uniden WIN1200 Series Owner's Manual

Setting the Date and Time

When you connect your phone to your computer and browse your contact list, the phone automatically updates its
date and time to the date and time on your computer. You should only have to set the date and time if your computer
is not connected. To change the date and time shown in the display, follow the steps listed below.
1. With the phone in standby, press the center of the joystick and select the system setup icon
2. Select the GLOBAL SETUP menu, and then the DATE & TIME submenu.
3. To change the date, just use the number keypad to enter the new date. To change the time, move the cursor
to the second line, and use the number keypad to enter the new time. Use * to change from AM to PM. Press
the center of the joystick when you're finished.

Activating Name Tagging

Name Tagging works with the caller display number from Caller ID. You'll need to subscribe to the Caller ID feature
with your phone company for Name Tagging to work.
When the phone rings, the received caller display number is compared to numbers stored in the phonebook. If there is
a match then any name stored with the phonebook number will be displayed. To change the Name Tagging setting,
follow the steps listed below.
1. With the phone in standby, press the center of the joystick and select the system setup icon
2. Select the GLOBAL SETUP menu, and then the NAME TAGGING submenu.
3. Select ON to activate NAME TAGGING.
4. Press the center of the joystick or the Select soft key. You will hear a confirmation tone.
22
.
.