Headset Installation (Optional); Display And Icons - Uniden WDECT 2355+2 Quick Start Manual

UP354BH(WDECT2355+2) OM 5/14/04

HEADSET INSTALLATION (OPTIONAL)

The headsets is used to make or receive a call. With the headset, you can have the
convenience of hands free communication while using your cordless phone.
1) Place the headset on your head so the speaker covers your ear. The other end of the
headset should rest comfortably against the side of your head above your ear. Do not
place the end of the headband against the other ear.
2) The microphone arm swings over the top of the headset so you can
wear the headset on the left or right ear. Position the flexible arm
so the microphone is about 5 cm away from your mouth.
3) To use the headset, plug the headset cord into the 2.5mm jack on
the side of the handset.

DISPLAY AND ICONS

Example of the
standby mode display
ICON STATUS
Battery icons indicate the handset
Standby/ battery status. This icon cycles
Talk depending on the battery status
(full, medium, low, and empty).
Ringer off icon indicates that
Standby
ringer is turned off.
Mute icon appears when you mute
Talk
the handset.
10:49 AM Page 9
Day of the week and time / battery icon
Handset ID and Banner
Number of new Caller ID calls received /
Ringer off icon (when the ringer is Off)
DESCRIPTION ICON STATUS DESCRIPTION
Speaker icon appears when the
Talk
handset speaker phone is used.
Booster icon appears when the
Talk
Clarity Booster feature is in use.
Privacy icon appears when the
Talk
Privacy Mode is turned on.
Recording icon appears while
Talk
recording a conversation.
[ 9 ]