9. DIP S/W Setting * ON : DOWN, OFF : UP DIGITAL LVDS OUT RGB OUT ON 1 Use Car GPS Use External * DIP S/W 2 Must ON Cable (Option) GPS Antenna Resistor Touch, Capacitive Touch UART Touch ON 1 RGB 800x480 RGB 480x234 Capacitive Touch...
Page 11
10. DIP S/W Setting 2 DIGITAL LVDS OUT 800x480 (Block RGB Signal) ON 1 ON 1 RGB 800x480 ON 1 ON 1 RGB 480x234 ON 1 ON 1 Use UART or Resistor Touch ON 1 ON 1 Use Capacitive Touch (GOODIX GT9XX) ON 1 ON 1 Use Capacitive Touch (ILITEK ILI2139DS)
Page 12
11. Install Manual - Capacitive touch ON 1 Use Capacitive Touch (Goodix GT9xx) ON 1 Use Capacitive Touch (ILITEK ILI2139DS) AV IN Car battery ACC 12V AUX OUT (CAR) Capacitive touch ON 1 LVDS IN RGB IN VIDEO VIDEO INTERFACE INTERFACE Speaker * Digital LVDS OUT always on , DIP S/W 1 = OFF...
Page 13
11-1. Capacitive Touch Setting (GOODIX GT9xx) 1.Run Device Setting app 2. Select Capacitive Touch Setting 3.Select adjust cap setting file 4. Waiting for reset device * DIP S/W 1 = ON, DIP S/W 4 = OFF : Capacitive Touch Goodix GT9xx Model DIP S/W 1 = ON, DIP S/W 4 = ON : Only Audi Q7 Capacitive Touch ILITEK ILI2139DS Model...
Page 14
12. Install Manual - Resistive touch ON 1 Use Resistive Touch AV IN Car Battery ACC 12V Resistor touch ON 1 RGB IN LVDS IN VIDEO VIDEO INTERFACE INTERFACE Speaker * Digital LVDS OUT always on , DIP S/W 1 = OFF * RGB OUT = DIP S/W 1 = ON * Resistive Touch = DIP S/W 1 = OFF...
Page 15
13. Install Manual – UART touch ON 1 Use UART Touch AV IN Car Battery ACC 12V ROiK UART RX connect with UART TX ROiK UART TX connect with UART RX ON 1 LVDS IN RGB IN VIDEO VIDEO INTERFACE INTERFACE Speaker * Digital LVDS OUT always on , DIP S/W 1 = OFF...
Page 16
14. Calibration – Resistive touch Push button 2~3 sec after booting Calibration mode After calibration, push screen few second * Capacitive touch panel no need set calibration...
15. Device Settings Analog RGB Setting (RGB Out Mode): RGB 800x480 or 480x234 screen change size and position Digital Out Setting (Digital Out Mode): LVDS screen change h/v position FMT Setting : Setting FM frequency External Speaker : Turn on/off external speaker Softkey Position : Change HOME Menu button position to Right or Left Softkey Auto Hiding : Change HOME Menu button...
Page 18
16. FMT Settings FM Transmitter On/Off or select FM frequency. Button + , - change FM frequency by 0.05Mhz FM.
Page 19
17. User Logo Update Hidden Menu Set User Boot Logo Activate 1. On SD-Card Root folder exist “userlogo” file. (File type = BMP image file) 2. Run Device Setting App 3. Click ‘Set Use Boot Logo’ and reboot ROIK If bmp file path is not on “/sdcard/userlogo”, and file name is not same, ‘Set User Boot Logo’...
Page 20
18. User Logo Update – Logo File Format userlogo = 800x480 pixel , 24bit bmp file...
19. Firmware Upgrade Copy ‘system_roik4’ folder to SD Card root and insert to GPS. Push hold this button and turn on (re-connect power cable), it will start upgrade *‘/sdcard/system_roik4’ Folder have ‘partmap.txt / boot.img / root.img’ files...