Selecting Channel; To Transmit And Receive - Uniden UH041/ Operating Manual

Color profile: Disabled
Composite Default screen

SELECTING CHANNEL

Press channel
desired channel.

TO TRANSMIT AND RECEIVE

The
UH041/UHO41P
reference a list of the available channels and corresponding
frequencies is printed on page 10.
1. Before you transmit, listen for
activity on the selected channel.
2. When the channel is clear, press
and hold the
appears on the LCD.
'TX'
Hold the radio with microphone approximately 5 cm in
front of your mouth with the antenna at approximately 45°
angle away from your head. Speak in a clear, normal
conversational voice.
3. When you have finished speaking, release the
listen for a response.
Note: While receiving, the
UH041 Manual.prn
UH041 Manual - UT01912AZ
Monday, October 13, 2003 6:52:26 PM
or to select the
uses the 40 UHF-CB Channels. For your
to transmit.
PTT
then disappears on the LCD.
'TX'
icon is displayed
'RX'
5
hi/lo
dup mon
channel/
scan
TX
PTT
hi/lo
Switch
dup mon
channel/
scan
and
PTT
volume
volume