Inuse.line.setup.(Base.only) - Uniden TRU9466 Owner's Manual

Inuse.Line.Setup.(Base.only)

The.Inuse.Line.Setup.feature.is.only.used.in.instances.where.you.have.multiple.phones.where.users.may.pick.up.an.
extension.while.someone.else.is.on.the.phone..Only.in.very.rare.instances.where.your.phone.system.is.not.detecting.
that.an.extension.phone.is.picked.up.will.you.ever.need.to.change.this.feature..In.most.all.situations,.this.feature.will.
never need to be used or modified from the factory default setting of TYPE-A. There are three settings for this fea-
ture:.TYPE-A,.TYPE-B,.or.OFF.
You.should.only.change.this.option.when.instructed.to.by.customer.service.and.when.you.are.experiencing.one.of.
the.following.issues:
Issue
When.using.an.extension.phone,.
"Line.in.Use".will.not.appear.in.the.
original.handset.display.
You.place.a.caller.on.hold..You.pick.
up an extension handset and finish
your.conversation..You.hang.up.the.
call.from.your.extension.handset,.
but.the.original.station.where.you.
placed.the.caller.on.hold.does.not.
release.the.line.and.therefore,.thinks.
you.still.have.a.party.on.hold.
Note:.Do.not.set.your.Inuse.Line.Setup.to.OFF.unless.instructed.to.by.a.Uniden.Customer.Service.Representative..If.
you.set.the.Inuse.Line.Setup.to.OFF,.your.phone.cannot.detect.the.status.of.an.extension.phone.while.in.use.and.will.
not.operate.correctly.
Problem
Your.phone.should.detect.when.an-
other.extension.phone.is.used.
Your.phone.system.is.not.detecting.
that.the.line.was.picked.up.and.re-
leased.
56
Resolution
Set.the.Inuse.Line.Setup.to."TYPE-
B".or.contact.Uniden's.customer.ser-
vice.hotline..See.back.cover.page.
for.contact.information.
Contact.Uniden's.customer.service.
hotline..See.back.cover.page.for.
contact.information.