Akaso Brave 7 LE User Manual page 9

4. Effect: Normal/BW/Natural/Negative/Warm/Brightness Contrast
Default setting is Normal.
5. Distortion Calibration: Off/On
Default setting is Off.
Turn on Distortion Calibration, it can correct the image distortion.
6. Driving Mode: Off/On
Default setting is Off.
If you turn on Driving Mode and connect camera with car cigarette lighter, the camera
will turn on automatically if you start your car and will turn off if you stop your car.
7. Upside Down: Off/On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent
upside down footage.
8. Screen Saver: Off/1 Min/3 Min/5 Min
Default setting is 1 Min.
Screen saver helps to turn off the display after a period of inactivity to save battery life.
To turn on the display again, press any button or tap the screen on the camera.
9. Auto Power Off: Off/1 Min/3 Min/5 Min
Default setting is 3 Min.
Auto Power Off helps to power off camera after a period of inactivity to save battery
life.
10. Power Frequency: 50Hz/60Hz
Default setting is 50Hz.
11. White Balance: Auto/Daylight/Shade/Tungsten Light/White Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize
for cool or warm lighting conditions.
13
12. Date&Time: MM/DD/YY
13. Language: English/ Deutsch/ Français/ Italiano/Español/Português/日本語
Default setting is English.
14. Format Card: Yes/No
Default setting is No.
To keep your microSD card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos and videos
first.
15. System: Factory Reset/System Info/Card Info
You can check the system information of your camera under this menu.
Factory Reset: Yes/No
Default setting is No.
This option resets all settings to their default values.
System Info: You can check the model and firmware version of your camera.
Card Info: You can check the card capacity and remaining space of your microSD
card.
14