Download Print this page

Safety Statement - FLIR SCION OTM130 User Manual

Thermal monocular

Advertisement

SAFETY STATEMENT

• Read and follow all instructions
• Read all warnings
• Only use the attachments/accessories
specified by the manufacturer
• All service must be provided by
the manufacturer
WARNING:
DO NOT DISASSEMBLE THE DEVICE.
Disassembly can cause permanent damage and
void the warranty.
WARNING:
This product contains natural rubber latex,
which may cause allergic reactions!
CAUTION:
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure.
CAUTION:
• Do not point the camera at high-intensity
radiation sources such as the sun, lasers,
or arc welders
• Do not leave fingerprints on the camera's
infrared optics. Clean only with low pressure
fresh water and a lens cloth
• Keep the equipment clean. Protect it from
moisture, dramatic temperature drops, and
electrical shocks
• DO NOT force the equipment controls past
their stopping points
• DO NOT leave the equipment activated during
breaks in operation
• DO NOT store the equipment with the
batteries installed
• Thoroughly clean and dry each item before
placing them into the storage case
NOTES:
• To avoid losing unsaved data, DO NOT remove
the batteries or disconnect the external power
source while the product is on
• Inadvertent sun damage is not considered
a defect in material or workmanship, and is
therefore not covered in the product warranty
Scion
Thermal Monocular
The Scion thermal imaging monocular is used as
a handheld viewer, and it has the ability to save
an image or a video clip.
Nevertheless, in the industry and throughout
this manual, this type of device is also referred
to as a camera.
5

Hide quick links:

Advertisement

loading