Page 1
FAURE HERMAN Route de Bonnétable B.P. 20154 72406 La Ferté Bernard - France Telephone 33 (0) 2 43 60 28 60 Fax 33 (0) 2 43 60 28 70 DIGITAL FLOWMETER PART NUMBER 744-082 744-082-3 COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST...
Page 2
Copyright FAURE-HERMAN 1997 This document is given in confidence and may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of FAURE-HERMAN. Unless FAURE-HERMAN (The company) has accepted a contractual obligation in respect of the information and data contained herein such information and data is provided without responsibility and the company disclaim all liability arising from its...
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 RECORD OF REVISIONS INSERTED INSERTED ISSUE ISSUE DATE DATE DATE DATE MAY 30/89 FEB 29/92 MAR 31/07 JULY 17/13 JULY 17/13 FAURE HERMAN 28-49-91 RECORD OF REVISIONS - PAGE 1/2 JULY 17/13 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 4
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 RECORD OF TEMPORARY REVISIONS ITEM PAGE NUMBER ISSUE DATE DATE REMOVED 28-49-91 RECORD OF TEMPORARY REVISIONS - PAGE 1/2 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 6
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 7
FEB 29/92 battery validity. Amdt C Increased battery lifetime (24 months). FEB 29/92 Amdt D P/N 744-082 and P/N 744-082-3. DEC 12/12 744082-28-001 Replacement of the obsolete lithium battery 744082-28-002 P/N LS210-PS30A. The battery, its support, the related components of fixation and connection are replaced by a lithium battery interchangeability kit P/N 206965.
Page 8
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 SERVICE BULLETINS LIST SERVICE BULLETIN STATE DATE DESCRIPTION IDENT 744-082-28-001 Issue 1 FEB 08/12 P/N 744-082-3 Replacement of obsolete lithium battery. 744-082-28-002 Issue 1 FEB 08/12 P/N 744-082 Replacement of obsolete lithium battery.
Page 10
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 LIST OF EFFECTIVE PAGES DATE OF DATE OF SUBJECT PAGE LATEST SUBJECT PAGE LATEST REVISION REVISION Title JULY 17/13 Testing and MAR 31/07 trouble shooting MAR 31/07 Record of JULY 17/13 MAR 31/07...
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 DATE OF DATE OF SUBJECT PAGE LATEST SUBJECT PAGE LATEST REVISION REVISION Vendor code 1007 JULY 17/13 index 1008 JULY 17/13 1009 MAR 31/07 1010 MAR 31/07 Numerical index 1011 JULY 17/13 1012...
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 LIST OF APPROVED REPAIRERS TRADE – NAME ADDRESS 28-49-91 LIST OF APPROVED REPAIRERS - PAGE 1/2 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 14
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 INTRODUCTION GENERAL A. This Maintenance Manual has been prepared in accordance with Standard 100 of the AIR TRANSPORT OF AMERICA (Standard ATA 100). B. This Manual provides all necessary information for reconditioning and also overhauling the item of equipment concerned.
Page 20
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 21
- the thermistors used to monitor the temperature. CHARACTERISTICS A. Dimensions and weight - Dimensions (see fig. 1). - Weight : 558 g (P/N 744-082) 583 g (P/N 744-082-3) B. Technical features - 28 V power supply. - Lighting by 5 lamps : 28 V, 120 ± 15 mA.
Page 22
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 DESCRIPTION A. External description (See I.P.L. figure 1) Face panel - LH fuel flow or remaining time display (430). - RH fuel flow or remaining quantity display (430). - Operating mode selector (480).
Page 23
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 DIMENSIONS FIGURE 1 28-49-91 PAGE 3/4 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 24
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 OPERATION A. Operating principle (See figure 2) The various circuit supplies are fed by a regulated 28 V DC external power source. A selector and two switches inform the microprocessor of the operating mode, the type of helicopter and unit of measure selected.
Page 26
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 27
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 BLOCK DIAGRAM FIGURE 2 28-49-91 PAGE 7/8 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 28
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 + 13 V control The filtered 28 V mains voltage is applied to regulator T4 which delivers a 13 V voltage regulated by a resistance bridge which references this regulator to 1 V. Once filtered, this 13 V voltage supplies the signal shaping circuits and the display brightness adjustment circuits.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 - B000 : Validation of the helicopter type and unit of measure selector switches (MN206), - C000 : Input validation (face panel control pushbuttons (IC13), - D000 : RAM validation (IC5), - F000 : EPROM read enable (MN203).
Page 31
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT DIAGRAM (P/N 744-082) FIGURE 3, SHEET 1 28-49-91 PAGE 11/12 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 32
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 33
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT DIAGRAM (P/N 744-082-3) FIGURE 3, SHEET 1A 28-49-91 PAGE 11a/12a MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 34
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Display circuit (See sheets 3 and 4) This circuit is used to display values according to the microprocessor data. It consists of 4 subassemblies : Displays : 7-segment display units DS1 to DS6,...
Page 36
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 37
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT DIAGRAM FIGURE 3, SHEET 2 28-49-91 PAGE 15/16 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 38
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 39
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT DIAGRAM FIGURE 3, SHEET 3 28-49-91 PAGE 17/18 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 40
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 41
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT DIAGRAM FIGURE 3 - SHEET 4 28-49-91 PAGE 19/20 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 42
The document reference is online, please check the correspondence between the online documentation and the printed version.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Monitoring circuit (See sheet 4) Monitoring circuit IC11 consists of 0 flip-flops and stores in its memory the data delivered by the microprocessor bus as long as they are not modified by the microprocessor. These data are used to : - reset the microprocessor and RAM (see para.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Shaping the signals delivered by the transmitters (See sheet 2) The signals delivered by the RH transmitter are amplified and filtered (circuit IC7). The filter/amplifier output signals are chopped by diode CR300 before being sent to the input of Schmitt trigger IC9 (1) which generates 5 V rectangular pulses.
- pins D and J are connected, - pins C and H are connected, - pins E and L are connected (P/N 744-082 only), - pins E and T are connected (P/N 744-082-3 only), - pin T is connected to the casing ground.
- Depress the brightness control knob (also used as a test button) and check that the LH and RH displays read "888" and the spare indicator light is on. - On flowmeter 744-082 only : - Open switch I - Ground connector pin R for the test.
Page 47
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 TEST SETUP FIGURE 101 28-49-91 PAGE 103 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 48
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Checking the quantity of remaining fuel presetting function - Close switch I - Rotate the "TEST - DIM" brightness control knob fully clockwise. - Set the "DEBIT-FLOW/T-Q.REST/PRESET" switch to "PRESET". - Check that the LH display unit is out and the RH display unit is on and read between 000 and 999.
Page 49
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 . Set LF generator G1 to the frequencies tabulated hereafter and check that correct values are obtained. G1 = 0 Hz G1 = 71.1 Hz RH display 250 ± 2 LH display (ii) - AS355/365 helicopters selected .
Page 50
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Calibration procedure for the units of measure - Select the AS355/365 helicopters using the rear RH selector. - Select each unit of measure one after the other using the rear LH selector. - Close switch I - Set resistance boxes BR1 and BR2 to 10 k.
Page 51
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Sensor matching - Select the AS355/365 helicopters using the rear RH selector. - Select "kg" using the rear LH selector. - Close switch I - Set LF generator G1 to a frequency of 50 Hz and resistance boxes BR1 and BR2 to 10 k.
Page 52
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 - Switch on LF generator G1 and start the pulse counter using switch Ig. when "200" is reached. Check that the LH display (remaining flight time) reads 820 ± 3 for the first 30 seconds.
Page 53
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AS332 helicopter - Select the AS332 helicopter using the rear RH selector. - Close switch I - Close switch I - Set LF generator G1 to a frequency of 87.41 Hz and an amplitude of 100 mV rms.
Page 54
- Check that the quantity of fuel remaining indicated on the RH display is the same as that noted above. - On model 744-082, open switch I Checking the spare indicator light function This indicator light should come on when the calculated flight time drops below 40 min.
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 TROUBLE SHOOTING NOTE : Check all connections before replacing any suspect part. Self L400 or Replace Power supply test L401 defective defective self (P/N 744-082-3) Replace PC PC board Z1 Displays board defective...
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Replace PC board Z1 PC board defective Erroneous Replace PC board Z3 reading on displays PC board defective depending on tem- perature Replace PC board Z2 PC board defective Sensor matching Replace PC board Z3...
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Checking the quantity of remaining fuel and flight time limit AS350 helicopter DEBIT-FLOW/T- Replace Q.REST/PRESET switch switch defective LH display reads 959 and RH display reads Replace PC board Z2 PC board defective...
Page 62
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Number of Replace PC board Z2 pluses recorded = PC board defective 13111 500 AS332 helicopter LH display reads 205 2 Replace PC board Z2 for the 1st PC board defective...
Page 63
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Checking the spare indicator light function Replace PC board Z2 PC board defective Remaining flight time decreases Replace PC board Z3 PC board defective Indicator Replace PC board Z2 light comes when PC board defective time = 40 min.
Page 64
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 65
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 DISASSEMBLY EQUIPMENT REQUIRED - 3 mm screwdriver. - 30/40 W soldering iron. - 8 and 10 mm wrenches. - Miniature lamp extractor. - Separator tool T5746F HARWIN. DISASSEMBLY (See IPL, figure 1) WARNING: STANDARD WORKSHOP PRACTICES MUST BE EMPLOYED THROUGHOUT...
Page 66
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 - Mark and unsolder the connecting wires from PC board (400). D. Removing "Logic" PC board (240) - Remove 4 screws (410) and associated washers (420) and free the assembly consisting of "Display" PC board (400) and "Logic" PC board (240) from face panel (130).
Page 67
- Remove four attaching screws (310) and retain washers (320), nuts (330) and terminal lug (340). - Remove the connector (300). Flowmeter 744-082-3 (See IPL, figure 7) - Mark and unsolder the connecting wires and components - Remove four attaching screws (70) (80), retain washers (90), terminals (110), nuts (100), lug (120), bar (130) and square (140).
Page 68
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 69
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CLEANING EQUIPMENT REQUIRED A. Tools and equipment - Soft brush. - Clean and lint free cloths. - Chamois leather. - Compressed air blower. B. Consumables - Cleaning agent Vigon EFM AVIATEC. - Dry, filtered, oil-free low-pressure compressed air.
Page 70
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 71
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CHECK CHECKING A. Equipment required - None. B. Procedure - Check the overall condition of the unit (paint, absence of scores, surface finish). - Check the condition of screw heads and nuts. - Check the condition of electrical leads and receptacle connector (connector pins inserted too far or damaged).
Page 72
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 73
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 ASSEMBLY AND STORAGE EQUIPMENT REQUIRED A. Tools and equipment - 3 mm screwdriver. - 30/40 W soldering iron. - 8 and 10 mm wrenches. - Torque screwdriver capacity of 2 cN.m to 135 cN.m (0.20 lb.in to 12 lb.in) with hexagonal male adapter.
Page 74
(340) under one of the washers. - Solder the marked wires to the connector. Digital flowmeter 744-082-3 (See IPL, figure 7) - Install connector (60) in its housing. - Fit two attaching screws (70) fitted with washers (90) and terminals (110).
Page 75
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Install face panel (130) on support plate (580) and fit 4 screws (110). Install knob (70), not forgetting the filters. C. Installing battery (See IPL, figure 4) Before Amendment D - Install the battery (120) on the support (110).
Page 76
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Fit 4 screws (410) fitted with washers (420) into both corner plates (350) and both brackets (560). Installing "Power supply" PC board (190) Install "Power supply" PC board (190), then fit 4 screws (200) fitted with washers (210) into both corner plates (350) and both brackets (560).
Page 77
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 FITS AND CLEARANCES EQUIPMENT REQUIRED This section includes fits and clearances and tightening torque table. The figure and item numbers in this chapter correspond with those of the ILLUSTRATED PARTS LIST. FITS AND CLEARANCES Not applicable.
Page 78
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 79
28 V DC power source, 1A Local supply Pulse counter Local supply 100 mV - 30 V DC voltmeter, class 0.5 or 1 Local supply SPST switches (P/N 744-082) (Qty 7) Local supply SPST switches (P/N 744-082-3 (Qty 6) Local supply Ohmmeter Local supply...
Page 80
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 B. Equipment and consumables The table below gives the equipment and consumables used to do the maintenance of the component. NOTE: You can use alternatives for the items in the list. UTILISATION SUPPLIERS...
Page 81
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 ILLUSTRATED PARTS LIST 28-49-91 PAGE 1001/1002 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 82
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 83
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 INTRODUCTION GENERAL The illustrated Parts List (IPL) is prepared in compliance with ATA 100. The IPL is intended to identify all the components of the unit. The Illustrated Parts List contains the following sections :...
Page 84
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 A "lettered index" appearing before the item number is a cross reference to the illustration of the variant called out from the corresponding main figure. B. Manufacturer's part number Each of the assemblies, sub-assemblies and detail parts, illustrated of not, is assigned a manufacturer's part number.
Page 85
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 Units per assembly The Units per Assy column shows the number of units required for the next higher assembly. In some cases this information is replaced by the letters REF (reference) or AR (as required).
Page 86
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 The letter "R" appears in the RH margin opposite the page number when all the item numbers are changed. 28-49-91 INTRO - PAGE 1006 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 87
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 VENDOR'S NAME - ADDRESS CODE FB083 SEVEMA SA 210, RUE RODOLPHE PAJEAUD 92160 - ANTONY FRANCE F0110 AFNOR (ASSOCIATION FRANCAISE DE NORMALISATION) TOUR EUROPE 92080 - PARIS LA DEFENSE CEDEX 7 FRANCE F0111...
Page 88
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 VENDOR'S NAME - ADDRESS CODE F0553 INTERTECHNIQUE SA B.P. 1 78374 - PLAISIR CEDEX FRANCE F0755 FAURE - HERMAN ROUTE DE BONNETABLE BP 20154 72400 LA FERTE BERNARD FRANCE F0894 MORS COMPOSANTS RUSSENBERGER SA...
Page 89
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 VENDOR'S NAME - ADDRESS CODE F4597 MOTOROLA SEMICONDUCTEUR SA B.P. 1029 LE MIRAIL AVENUE DU GENERAL EISENHOWER 31023 - TOULOUSE CEDEX FRANCE F5056 HEWLETT-PACKARD FRANCE (STE) SA QUARTIER DE COURTABOEUF 91400 - ORSAY...
Page 90
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 VENDOR'S NAME - ADDRESS CODE 80294 BOURNS INSTRUMENT INC 6135 MAGNOLIA AVE RIVERSIDE CA 92506-2521 ETATS-UNIS 86684 RCA CORP ELECTRONIC COMPONENTS DIV ELECTRONIC COMPONENTS HARRISON NJ ETATS-UNIS 28-49-91 VCI - PAGE 1010 MAR 31/07...
Page 104
The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 105
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 DETAILED PARTS LIST 28-49-91 PAGE 1025 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 106
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 INDICATOR, FLOWMETER FIGURE 1 28-49-91 PAGE 1026 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 107
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-082 INDICATOR, FLOWMETER F0553 - 1B 744-082-3 INDICATOR, FLOWMETER F0553 745-091 . PLATE, IDENTIFICATION...
Page 108
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY ATTACHING PARTS 250A H1Q1QC020005ACG . . SCREW F0110 260A XBAG020SCG . . WASHER, LOCK...
Page 109
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 THIS PAGE LEFT INTENTIONALLY BLANK 28-49-91 PAGE 1029 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 110
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT CARD, ASSEMBLY FIGURE 2 28-49-91 PAGE 1030 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 111
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-062AAA CIRCUIT CARD ASSEMBLY SEE 01-220A FOR NHA - 1B 744-127AAA CIRCUIT CARD ASSEMBLY...
Page 112
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT CARD, ASSEMELBY (CONT'D) FIGURE 3 28-49-91 PAGE 1032 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 113
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-062BAA CIRCUIT CARD ASSEMBLY (CONT'D) SEE 01-230A FOR NHA - 1B 744-127BAA...
Page 114
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT CARD, ASSEMBLY FIGURE 4 28-49-91 PAGE 1034 JULY 17/13 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 115
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-088 . CIRCUIT CARD ASSEMBLY F0553 SEE 01-240A FOR NHA - 1B 744-109 .
Page 116
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY 220A SN54LS138J . . MICROCIRCUIT, DIGITAL F2210 230A SN54LS00JRB . . MICROCIRCUIT, DIGITAL F0114...
Page 117
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 THIS PAGE LEFT INTENTIONALLY BLANK 28-49-91 PAGE 1037 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 118
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT CARD, ASSEMBLY FIGURE 5 28-49-91 PAGE 1038 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 119
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-095 CIRCUIT CARD ASSEMBLY F0553 SEE 01-400A FOR NHA 53137-5 . SELECTOR...
Page 120
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 CIRCUIT CARD, ASSEMBLY (CONT'D) FIGURE 6 28-49-91 PAGE 1040 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 121
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-095AAA CIRCUIT CARD ASSEMBLY (CONT'D) SEE 05-320A FOR NHA CN72-1-63V10KM . CAPACITOR, FIXED, CERAMIC...
Page 122
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 REAR FACE FIGURE 7 28-49-91 PAGE 1042 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 123
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY 744-116 REAR FACE, ASSY F0553 SEE 01-390B FOR NHA CN52-100V1KM . CAPACITOR, FIXED, CERAMIC...
Page 124
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 FRONT FACE, ASSY FIGURE 8 28-49-91 PAGE 1044 MAR 31/07 The document reference is online, please check the correspondence between the online documentation and the printed version.
Page 125
FAURE-HERMAN COMPONENT MAINTENANCE MANUAL 744-082 / 744-082-3 AIRLINE UNITS FIG. USAGE PART NUMBER PART NOMENCLATURE ITEM CODE NUMBER 1 2 3 4 5 6 7 ASSY - 1A 744-117 FRONT FACE, ASSY F0553 SEE 01-580B FOR NHA 745-126 . SHIM...
Page 126
The document reference is online, please check the correspondence between the online documentation and the printed version.