Adjusting.the.audio.tone; Using.the.clarity.boost.feature; Finding A Lost Handset - Uniden TRU12803 Series Owner's Manual

Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
) With.the.phone.in.talk.mode,.press.[select/
2) When.the.desired.option.appears.on.the.display,.stop..
3) After.two.seconds,.the.displayed.audio.tone.is.set,.and.the.display.returns.to.normal.
Using the Clarity Boost Feature
If.you.encounter.interference.while.using.your.phone,.you.can.manually.improve.the.sound.by.setting.the.clarity.
booster.to.on..This.works.only.when.the.phone.is.in.use,.so.while.you.are.on.a.call:
) Press.[menu/clear].
2) Move.the.cursor.to.CLARITY.BOOST,.and.then.press.[select/
Use.the.same.procedure.to.turn.off.clarity.booster..BOOST.OFF.appears.

Finding a Lost Handset

To.locate.a.misplaced.handset,.press.[find hs].on.the.base.when.the.phone.is.in.standby..All.registered.handsets.
will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.[find hs].again.or.
any.key.on.the.found.handset.
]..to.cycle.through.the.three.audio.tone.options.
]..BOOST.ON.and.B.appear.in.the.display.
3