Placing A Call On Hold; Redialing A Call - Uniden TRU 8866 Series Owner's Manual

Placing a Call on Hold

1) During a call, press intcom/hold on the handset or
intercom/hold on the base. The line soft key (LINE1 or
LINE2) to be placed on hold will flash. The call will be
put on hold.
If you leave a call on hold for more than 10 seconds,
the display screen will read
2) To talk to the caller, press talk/flash or speaker on a handset (or speaker on the
base). The phone will return back to the call.

Redialing a Call

The last three phone numbers dialed can be quickly
redialed from the handset or base.
1) With the phone in standby mode, press vol/
redial/p (or redial/pause on the base) in standby
mode.
2) Press volume up/down. Each press of volume up/
down will display one of the last three number
redialed.
3) Press talk/flash or speaker on the handset (or
speaker on the base). The selected number is dialed.
4) To hang up, press end (or speaker on the base).
w w w . u n i d e n . c o m
H ol d .
volume up/down
/
volume up/down
note
•You can place a call on
hold for 15 minutes.
When 15 minutes has
passed, the call is
disconnected, and the
phone returns to
standby mode.
•While a call is on hold,
CIDCW can not be
received.
•If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
•If the redial memory is
empty, you will hear a
beep.
•Redial numbers stored
in the handset and the
base are independent
from each other.
•To store or delete
redial numbers in the
Phonebook, see
page 44.
U S I N G Y O U R P H O N E [ 3 2 ]