Setting Ring Time Switch - Uniden EXS 2080 Owner's Manual

40

Setting ring time switch

The ring time/toll saver switch
allows you to set the number of
rings the caller hears before the
answering system plays your
outgoing message. You can set
the switch to answer after two
rings or after four rings.
Once the greeting has started, you can stop it when you pick up
the call at the handset or base.
In the TS (Toll Saver) position, the answering system picks up
after two rings if you have new messages, and after four rings if
there is none. This way, if you call long distance to check your
messages, you can hang up after the third ring to avoid billing
charges.
If you answer at another phone extension and the
greeting has started, you cannot stop the message.
Wait until your greeting is complete before starting
your conversation.
RING TIME
2/4/TS