Using Redial; Placing A Call On Hold - Uniden EXS 9660 Owner's Manual

The EXS 9660 has two
independent Last Number
Redial memories, one in
the handset, the other in
the base.
Do not use the base and
the handset keypads at
the same time to place a
call on hold.
20

USING REDIAL

The key redials the last number dialed.
redial
The redialed number can be up to 32 digits long.
To redial from the handset:
Press , then press
line 1
Or, press , then press
redial
If any key is pressed before redialing, the
last number will not redial.
To redial from the base:
Press , then press
line 1
If any key is pressed before redialing, the
last number will not redial.

PLACING A CALL ON HOLD

Use either the keypad on the handset or the keypad on the base.
1. To place on hold at the
line 1
base, press . The
hold
from green to red.
2. To place on hold at the
line 1
handset, press
hold
The following screen appears:
3. To pick up the call that is holding,
press on the base or handset.
line 1
.
redial
.
line 1
.
redial/p
LED turns
line 1
.
(Hold)
Line 1