Using Caller Id - Uniden EXS 9660 Owner's Manual

36

USING CALLER ID

You must subscribe to Caller ID from your phone company
to use this feature.
Setting up Caller ID options
There are three Caller ID options available; they are AutoTalk, CIDCW,
and Area Code.
AutoTalk allows you to answer the phone without pressing
. If the phone rings when AutoTalk is on, simply remove the
line 2
handset from the base. If the handset is off the base, press any key. The
phone automatically answers the call. If the phone rings when
AutoTalk is off, you must press
This option is useful for screening calls.
CIDCW (Caller ID with Call Waiting) performs the same as regular
Caller ID on a call waiting number. You must subscribe to CIDCW
from your phone company to use this feature.
Area Code allows you to program your 3-digit area code number.
When reviewing Caller ID messages, you will see only a seven digit
number for calls received from inside your area code. For calls from
outside your area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing,
do not program this option.
To change your Caller ID options:
Turning AutoTalk and Caller ID/Call Waiting On or Off
1. Press and hold
caller id
seconds. The following screen appears:
2. Use the and
3. Press s s e e l l e e c c t t .
or
line 1 line 2
for two
keys to select line 1 or line 2 .
line 1
to answer the call.
Caller ID Setup
1>Line 1
2 Line 2
or