Uniden EXS 2080 Owner's Manual page 13

Charge the battery pack for more than 15-20 hours before you
start using your phone.
status LED
Use only Uniden Battery (BT-905) supplied with your
phone.
1
Press in on the battery cover
release and slide the cover
down until it comes off.
2
Connect the battery pack
connector with the correct
polarity (black and red
wires), then insert the battery
pack into the battery
compartment.
3
Slide the battery cover
forward until it snaps into
place.
4
Place the handset on the
base.
5
Make sure that the "status"
LED lights. If the LED
doesn't light, check to see
that the AC adapter is
plugged in and that the
handset makes good contact
with the base charging
contacts.
9