Advertisement
HOLD
TONE
Put a call on hold
Select a better channel
Adjust the handset volume Set the VOL switch to H (high), M (middle) or L (low).
Switch to tone dialing
temporarily
Switch to another call
("call waiting" service*)
Turn on/off the ringer
of the handset
* You need to subscribe to the service from your telephone company.
When the phone rings, press
SPEAKER
on the base phone.
The SPEAKER LED and the
LINE LED light up.
"- -" appears on the display.
To adjust the speaker volume,
VOL
press
VOL
or
When you are done talking, press
SPEAKER
again.
To obtain the best speakerphone
performance, see page 18.
To adjust the ringer volume, see page 24.
FLASH
CHANNEL
Press
HOLD
.
The TALK/BATT LOW LED flashes slowly.
Press
TALK
to resume the conversation.
Press
.
CHANNEL
Press
TONE
while using the telephone after you're connected.
The line remains in tone dialing until disconnected.
Press
to access the flash function.
FLASH
Press
again to return to the first caller.
FLASH
See "Setting the ringer type" on page 23.
.
When you hear the phone ring;
• Press
TALK
(or any key except
or
• Pick up the handset from the base
phone when the handset is placed
on the base phone.
The TALK/BATT LOW LED on the
handset and the LINE LED on the
base phone light up.
When you're done talking, press
OFF
or replace the handset on
the base phone.
The TALK/BATT LOW LED on
the handset and the LINE LED on
the base phone go off.
TONE
HOLD
OFF
).
FLASH
SPEAKER
Basics
Advertisement
