After Hours Mode Settings; Monday Thru Friday; Dial Displayed Number - Digitone ProSeries II Call Blocker Operation Manual

After Hours Mode Settings

Step 1) Monday thru Friday – Start Code 82 & End Time Code 83
Using military time as shown above, set this feature on by enter programming: press
and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick
Up Phone", when the prompt for "Enter Code" displays enter 82, then enter the Start
time of day Ex. 1700, 5:00pm, display shows function. Next, when the prompt for
"Enter Code" displays enter 83, then enter your End time of day Ex. 0645, 6:45am,
display shows function.
Full Day After Hours Mode can be enabled when both Code 82 and Code 83 are the
same number. Ex. 0454, or 4:54am for Code 82 and 0454, or 4:54am for Code 83.
This setting leaves the After Hours Mode - On 24 hours a day. Use Code 88 in
programming to enable 24 hour After Hours Mode or Code 89 to disable 24 hour After
Hours Mode.
Step 2) Monday thru Friday – Enable Code 84 Disable Code 85
To enable Monday thru Friday, when the prompt for "Enter Code" displays, enter 84,
display shows function. To disable Monday thru Friday, when the prompt for "Enter
Code" displays enter 85, display shows function.
Step 3) Saturday & Sunday – Enable Code 86 Disable Code 87
If you want the same time interval to work during Saturday and Sunday, when the
prompt for "Enter Code" displays, enter 86, display shows function. To disable this
feature, when the prompt for "Enter Code" displays, enter 87, display shows function.
Step 4) After Hours Mode Code 81 ON or Code 80 OFF
To enable After Hours Mode, enter programming: when the prompt for "Enter Code"
displays, enter 81, display shows function. To turn this feature Off, when the prompt
for "Enter Code" displays enter 80, display shows function. Note: To enable After
Hours Mode you must first enter Start and End times (above) and day periods (M-S).

Dial Displayed Number

GRAY Button Code 91
The DIAL button can be used to dial the number displayed of someone who has called
in using the Arrow Up and Down buttons to select a specific caller. Simply press and
hold the Dial button for 1 second to start dialing that number. The default operation of
the DPCB is to prompt you to either add or remove the "1" (USA Country Code) before
the DPCB dials the number. The prompt will ask "Dial 1?" and to answer that prompt
use the Up arrow key for YES and the Down arrow key for NO. After selecting an
answer the DPCB will dial the number after which the display will prompt you to "Pick
Up Phone". To disable the Dial 1 prompt enter programming: press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",
when the prompt for "Enter Code" displays enter 90, display shows function. To return
to the (default), enter programming: press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for
"Enter Code" displays enter 91, display shows function.
11