Uniden EXAI3985 Owner's Manual page 45

9 Press or until you hear the correct AM or PM setting. The
message counter displays [ ] or [ ].
10 Press to select the AM/PM setting.
flash/set
A confirmation tone sounds, then the day and time are announced for
your review.
Setting a Personal Security Code
To play your messages from a remote location, you will need to enter a
two-digit Personal Identification Number (PIN) code (00-99). To select a
PIN, perform the following steps:
1 Press
The current PIN code is announced as it is displayed
status
on the base.
ans. on/off
memo/rec delete
2 Press
announces current PIN code.
3 Press
mute/menu redial/p memory flash/set
4 Press
A confirmation tone sounds, system announces the
new PIN code.
To exit the menu mode, press
three times.
mute/menu
to change the PIN code. The system
flash/set
or until the desired number appears.
to select the PIN code.
flash/set
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 43 ]
if desired.
note
The PIN code is set to
"80" when you purchase
the EXAI3985.