Page 1
The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.
Page 2
INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before installing the ProClip. 1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Remove the adhesive tape cover on the ProClip. Hold the ProClip vertically so the s-shaped lower edge can be inserted into the gap between the lighter and darker part of the dashboard.