Table of Contents
Advertisement
Step 3
Preparing the battery pack
Charge the battery pack for 12-15 hours before connecting the phone line.
1
Press and slide the battery
compartment cover toward the
bottom of the unit.
2
Connect the battery pack connector
with the correct polarity (black and
red wires), then insert the battery
pack into the battery compartment.
3
Securely close the battery
compartment cover by sliding it up
until it snaps into place.
4
Place the handset on the base unit
with the keys and display
facing upward.
This position lets you see Caller ID
messages on the display.
When the handset has been properly
placed on the charging terminals of
the base unit, the "status" LED of
the base unit lights and charging
begins. Charge the battery for 12-15
hours.
You can place either side up for
charging the battery.
9
Advertisement
Table of Contents
