Using the answering machine
Remote room monitor
You can call your answering system from any touch-tone phone and monitor sounds
in the room where your base unit is installed.
1
Call your telephone number.
2
During the outgoing message playback, press
3
The answering system begins announcing the time and day stamp.
4
#
Press
then
You hear sounds in the room where your phone is installed. After 15 seconds, the
answering system returns to the command waiting mode.
5
#
Press
then
remote function. Or hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering machine remotely
If you have forgotten to turn on your answering machine, you can turn it on remotely
from any touch-tone telephone.
1
Call your telephone number.
2
Wait ten rings until the machine answers.
You hear a beep.
3
Enter your PIN code.
The answering system begins to announce the time and day stamp.
4
#
Press
then 6 to turn the answering system on.
5
Hang up the phone and subsequent calls will be answered by the machine.
44
*
while the system announces the time and day stamp.
*
to monitor the room for another 15 seconds. Or select another
(continued)
#
followed by your PIN code.