Advertisement
PRODUCT INSTALLATION
IMPORTANT
Please be advised that the provided T-Valve
should be installed at the fill valve under the
toilet tank, NOT down at the water supply
coming from the wall.
If you do not have access to the fill valve under
the toilet tank.contact Bio Bidet Customer
Service at 847.458.2334 and we may be able to
provide alternative fittings.
Inspect your current water supply line that connects to the toilet tank
fill valve to ensure it is a flexible water supply hose. If it is a rigid
pipe ,you will need to purchase a flexible water supply hose before
installing the SlimGlow. The hose needs to be 7/8"(to connect to the
T-valve we provided) on one end and either 3/8" or ½",depending
your wall valve, on the other end.
Notice : Observe all local plumbing, electrical,
and building codes.
INSTALLING THE SlimGlow
W arning : U se care to avoid cross threading
or overtightening. Overtightening can cause
leaking.
1.Remove the existing toilet seat by locating the
bolts and nuts, typically under a plastic cover,
and removing them first.
5
on
Step 1
Advertisement
