Table of Contents
Advertisement
4 You may select a command from the following chart:
Command
# then 1
# then 2
# then 3
# then 4
# then 5
# then 6
# then 7
# then 8
# then 9
# then 0
* For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function.
If you want to stop the recording, enter the command again.
5 After the command was finished, you hear intermittent beeps indicating
that the system is in the command waiting mode. You may enter another
command at this time from the chart above.
6 When you are finished, hang up to exit the system. The answering
system automatically returns to standby.
Function
Repeat a Message
Playing your Messages
Skipping a Message
Deleting a Message
Stop Message Playback
Answering System On
Memo Record/Stop *
Greeting Message Record/Stop *
Answer System Off
Help Guidance
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
note
• You must enter a
command within 15
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
• The system will only
playback messages for
four minutes and then
it returns to command
waiting mode. To
continue playing your
messages, press
#
then 2 again within
15 seconds.
[ 35 ]
Advertisement
Table of Contents
