Uniden EXA 3955 Owner's Manual page 31

Setting the Ring Time
The ring time setting allows you to set the number of rings the caller
hears before your answering system plays the outgoing message. You can
set the ring time to answer after two, four, or six rings. Setting
(Toll Saver), the answering system picks up after two rings if you have
new messages, and after four rings if there are none. This way, if you
make a long distance call to check your messages, you can hang up after
the second ring to avoid billing charges.
1 Press
The current ring time setting is announced ([ ] 2,
[ ] 4, [ ] 6, [
status
status
on the base.
ans. on/off
ans. on/off
memo/rec delete
memo/rec delete
2 Press
3 Press
mute/menu redial/p memory flash/set
mute/menu redial/p memory flash/set
4 Press
A confirmation tone sounds, the system announces
the new ring time.
five times.
mute/menu
] Toll saver), and it is displayed
to change the ring time.
flash/set
or until the desired ring time appears.
to select the new ring time.
flash/set
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 29 ]