Uniden EXA 3955 Owner's Manual page 10

!
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed and
create a fire or
electrical hazard.
note
The handset can be
placed face up or face
down in the base
for charging.
tip
If your telephone outlet
isn't modular, contact
your telephone company
for assistance.
[ 8 ] G E T T I N G S T A R T E D
C. Connect the base unit
1 Connect the AC adapter to the
DC IN 9V jack and a standard 120V AC
wall outlet.
2 Set the base on a desk or tabletop,
Pull back stand out for base support
and place the handset on the base
unit as shown.
3 Raise the antenna to a vertical
position.
4 Make sure the status LED lights. If the LED does not
light, check to see that the AC adapter is plugged in.
• Use only the supplied AC adapter. Do not use any other AC adapter.
note
• Connect the AC adapter to a continuous power supply.
5 Connect the telephone line cord to the TEL LINE jack
and a telephone outlet once the handset is
fully charged.
Modular