A.O. Smith CAHP-MC-38 Installation, Operation And Maintenance Instructions page 45

Menu Item
HP STATUS
FAN STATUS
COMPRESSOR
4-WAY VALVE
EEV STEPS
WATER IN TEMP
WATER OUT TEMP
AMBIENT TEMP
SUCTION TEMP
DISCHARGE TEMP
COIL TEMP
SOFTWARE VERSION
Note: Press the "BACK" button to return to the main page of the interface and press the "HELP" button to enter the menu
for help.
HP STATUS displays the actual status of the heat pump.
OFF: The hot water system is in off status.
HEATING: The heat pump is in operation status to heat water.
DEFROST: The heat pump is in defrosting cycle.
STANDBY: The heat pump is in standby status due to there is no hot water demand
or there are other conditions which do not meet the heat pump operation
conditions.
FAN STATUS displays the actual status of the fan.
HIGH: High speed operation
LOW: Low speed operation
OFF: Stop
COMPRESSOR displays the satus of the compressor.
4-WAY VALVE displays the position of the 4-way reversing valve.
EEV STEPS displays the actual openning of the electronic expansion valve.
WATER IN TEMP displays the actual inlet water temperature of this unit.
WATER OUT TEMP displays the actual outlet water temperature of this unit.
AMBIENT TEMP displays the actual ambient temperature read by the ambient
temperature sensor of this unit.
SUCTION TEMP displays the actual suction temperature of this unit.
DISCHARGE TEMP displays the actual discharge temperature of this unit.
COIL TEMP displays the actual coil temperature of this unit.
SOFTWARE VERSION displays the actual software verison of this unit.
Description