Table of Contents
Advertisement
6) Press memory or select/channel.
displayed.
The cursor flashes indicating that the display is ready for
the number to be entered.
7) Use the keypad to enter the phone number; each number
can be up to 20 digits.
If you need the phone to pause during the dialing sequence,
press redial/pause to insert a two-second delay between
the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a
for every pause.
8) Press memory or select/channel. You will hear a
confirmation tone, and the following screen appears.
Memory storage is complete.
After about 2 seconds, the screen displays the list of the
entries in Speed Dial Memory.
9) Press end to exit memory setup mode. The phone returns to
standby.
www.uniden.com
is
M E M O R Y D I A L I N G
[ 25 ]
Advertisement
Table of Contents
