Using the Intercom
You can use the intercom to talk to another station without using the phone line.
Making an Intercom Page
From the base
1. With the phone in standby, press
int'com/xfer]
on the dual-keypad base). All other
stations will be paged. (On the dual-keypad base,
press
[1]
through
[4]
to select the handset you
want to talk with or press
[*/tone]
stations.)
2. To cancel the intercom page, press
(
[hold/int'com/xfer]
on the dual-keypad base).
Note: Intercom paging will be canceled if any of the following things occur:
--You receive an outside call or an intercom page while selecting the other handset.
--You do not select a handset within 30 seconds.
--The party does not answer the page within one minute.
--The party is busy.
--The party is out of range (UNAVAILABLE appears in the display).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is paging.
1. From the handset, press
[ / flash]
the page when you remove the handset from the cradle.
2. From the base, press
[int'com] [hold/int'com/xfer
(
3. To hang up an intercom page from the handset, press
[int'com] [hold/int'com/xfer]
(
on the dual-keypad base).
From the handset
[int'com] [hold/
(
1. With the phone in standby, press
[xfer/intercom]
2. Use
[
]
want to talk with, then press
to page all
Select ALL to page all other stations paged.
3. To cancel the intercom page, press
[int'com]
or
[xfer/intercom]
. If AutoTalk is on, the handset will automatically answer
] on the dual-keypad base) or
[
]
. To hang up an intercom page from the base, press
[41]
.
or
[
]
to select the station you
[select/
]
.
[
]
.
[speaker]
.