Keypad Lock
Use Keypad Lock to disable key response. You can still answer calls, receive page and receive copy phonebook
locations - keylock will reactivate after these operations.
To lock the keypad
Press and hold
[*/tone/<]
until you hear a confirmation tone. KEYPAD LOCKED appears.
If any key is pressed when keypad is locked, TO UNLOCK KEYPAD PRESS & HOLD *KEY appears.
To unlock the keypad
Press and hold
[*/tone/<]
again. KEYPAD UNLOCKED appears.
Making a Call from the Phonebook
1. When the phone is in standby, press
2. Move the cursor to select DIAL/EDIT, and then press
3. Find the phonebook entry you want to call (see
4. Press
[
/ flash]
or
[
]
to dial the number.
Note: You can also press [ /flash] or [
phone number you want to dial, press [select/
Making a Call with Handset Speed Dial
1. When the phone is in standby, press and hold one of the number keys (
phonebook entry appears in the display.
2. Press
[
/ flash]
or
[
]
to dial the number.
Making a Call with Base Speed Dial (Dual-keypad Base Only)
1. When the phone is in standby, press
2. Press
[memory]
.
3. Press the number key (
[0]
through
programmed number.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press
normal call, press
[
]
.
[
]
to open the phonebook.
[select/
]
.
Finding a Phonebook Entry
] before you open the phonebook. When you come to the
].
[speaker]
.
[9]
) where the desired phone number is stored. The phone dials the
[
]
on the handset. To switch from a speakerphone call to a
[31]
on page 24).
[0]
through
[9]
) until the assigned