Call Waiting; Hold - Uniden DS72 Owner's Manual

The c.wait procedure
toggles between the incoming
and original call (vice versa).
The c.wait procedure will
drop the current call and pick
up the incoming call or call
on hold.
The flash + 2 call waiting
procedure toggles between
the incoming and original
call (and visa versa).
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.
In New Zealand you must
subscribe to Telecom's Call
Waiting Service before you
can use this feature.

CALL WAITING

For Australian Version
Using the c.wait feature
Please call your local telephone service provider to check the availability of this
service in your area.
1. While talking you hear the Call Waiting signal.
2. Press button.
c.wait
3. The existing call is placed on hold.
4. Talk to the second caller.
5. Press button to end the current call.
talk
6. The phone will ring back indicating
that the first caller is still on hold.
7. Press button to answer this call.
talk
8. Press button to end the call.
talk
Using the Flash Key
To access Telstra's Call Waiting Service, you can either use the
the key.
flash
1. While talking you hear the Call Waiting signal.
2. Press then
flash 2
3. To switch back to your original call, press
For New Zealand Version
Using the c.wait or flash key
1. While talking you hear the Call Waiting beep signal.
2. Press or the
c.wait
"hook-flash" on the telephone line for accessing services such as
Call Waiting etc.

HOLD

To use the hold feature during a
conversation, press
hold
be able to hear. To disable the hold feature, press
again.
hold
to switch call and put the current call on hold.
flash
key. This feature sends a 600ms timed
flash
. Both parties will not
c.wait
flash
button or
c.wait
then .
1
hold
21