Advertisement
IV. Pen-Tray Mounting
3. After confirming the tray is centered correctly, hand-tighten all screws.
4. Connect the pen tray's 2 USB cables to the computer used to operate the display. One
cable must be connected for the pen tray hotkeys and another for the pen tray's USB data
hub.
1. Install the mounting brackets to the bottom of the
pen tray using the 8 screws provided. Ensure they align
with the mounting marks.
2. Align the pen tray in front of the display with the
brackets over the rear mounting holes. Install the 6
rear holding screws to fasten the bracket to the display.
Advertisement
