Aligning Wheel And Checking Wheel Nut (Ah); Aligning Wheel And Checking Wheel Nut (Ah); Checking Differential Lock Cable (Ai); Checking Differential Lock - Kioti MEC 2230SW Owner's Manual

AlIGNING WhEEl AND ChECkING WhEEl NUT (Ah)

1. park the vehicle on level ground
and apply the parking brake firmly.
(1) Wheel Nut
2. unscrew the nuts on the wheel to
be replaced for only 1 turn.
3. lift the vehicle with a hydraulic
jack and then support the vehicle
with the safety stand. then, lower
the hydraulic jack so that the ve-
hicle chassis sits on the stand.
4. unscrew the wheel nuts complete-
ly to remove the wheel.
5. after reinstalling the wheel after
inspection, tighten the wheel nuts
firmly.
UD130(MEC2230SW)-유럽향-07.indd 41
WARNING
•
Driving with loose wheel nuts
is very dangerous and can
lead to overturn and collision.
Make sure that they are firmly
tightened.
IMpoRTANT
•
The tire inflation pressure and
wheel nut tightness should be
inspected daily.
UUVo746A
MaiNteNaNce
ChECkING DIffERENTIAl
loCk CABlE (AI)
(1) Differential lock cable (2) Nut
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine, raise the cargo
bed and support it with the support
rod. (in case the hydraulic dump-
ing kit is installed, raise the car go
bed before stopping the engine)
7
-1
UUVo759A
7
2015-10-28 오후 12:02:07