Maintenance; Protecting The Environment - Black & Decker BDJS450I Manual

ENGLISH
Should the unit run over an extended period of
X
time it may overheat and cause the thermal trip
to activate. When this occurs switch the
compressor off and allow to cool for 30
minutes.
Keep the compressor stored out of reach of small
X
children.
The gauge is intended as a guide only. Tyre
X
pressures should be regularly checked with a
certified gauge.
Do not over inflate any object as this may cause
X
a risk of injury.
This inflator can be used to inflate car tyres and
sports equipment.
Remove the inflator hose from the storage
X
compartment.
If an adaptor is required, choose the correct
X
adaptor for the product you are inflating and fit
it into the nozzle (2).
Fit the nozzle (2) of the inflator or the adaptor, if
X
fitted, to the valve of the item to be inflated.
Make sure that the nozzle (2) is locked in
place.
Move the inflator switch (1) to the on position (I).
X
Monitor the pressure gauge (3) until the required
X
pressure is reached.
Move the inflator switch (1) to the off position (0).
X
Remove the adaptor, if fitted, or the nozzle (2)
X
from the inflated item.
Remove the adaptor, if fitted, and store it in the
X
inflator nozzle storage compartment (15).

Maintenance

Your Black & Decker tool/appliance has been
designed to operate over a long period of time
with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance or
cleaning on the tool/appliance, unplug the
appliance. From time to time wipe the appliance
X
with a damp cloth. Do not use any abrasive or
solvent-based cleaner. Do not immerse the
appliance in water.
After each use, clean the battery clamps (4) and
X
be sure to remove any battery fluid that will
cause corrosion of the clamps (4).
8
Clean the outside case of the battery charger
X
with a soft cloth and, if necessary, mild soap
solution.
Do not allow liquid to enter the battery charger.
X
Do not operate when the battery charger is
wet.
Keep the battery charger cords loosely coiled
X
during storage to prevent damage to the
cords.

Protecting the environment

Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Reuse of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised Black
& Decker repair agents and full details of our after-
sales service and contacts are available on the
Internet at: www.2helpU.com.
Lead acid batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment: