Systemview 2.0A - EasyIO EasyIOeu SH-SystemView7 Configuration Manual

EasyIOeu SH-SystemView7 Configuration
SystemView 2.0a
This app was made to keep the web page opened and to exit only through password.
SystemView app will open on boot and even when the touch panel reboots it will open
automatically.
To configure this app you just need to set the IP of your device and first time you power the touch
panel you need to set to open this app always on boot.
How to exit from SystemView
To exit from SystemView you have to swipe down on top of the screen, then press the three dots in
the top right corner and then click on Settings. You will be prompted to enter a password, the
default password is "345710ʺ (without quotation marks). On SystemView Settings you can change
the settings of the app, if you want to go to Android Settings or Android launcher you have to go to
Admin and then click on System Settings or Exit to Launcher depending on where you want to go.
How to change the IP on SystemView
To change the IP on SystemView you need to go to SystemView Settings (step above), then click on
General and change the SystemView URL. (it has to start with http:// or https://)
How to exit from Android Settings
To exit from Android Settings you need to go to Settings>Apps click on Settings and then Force Stop.
Doing this you are stopping the Settings and then it will open the SystemView (if you were there
before).
How to install a new SystemView version
To install a new version of SystemView first go to Settings->Apps and click on SystemView then
Uninstall.
Power down the touch panel and connect an USB stick with the latest SystemView app.
Power on and go to Menu->File Manager->USB->usbhost0 and click on latest SystemView apk file.
Installation will start.
Power down and remove the USB stick.
10