UNITED UHF-828 User Instructions

FAN HEATER
USER INSTRUCTIONS
Model: UHF-828
220--240V～50Hz 2000W

FOR YOUR OWN SAFETY

1. Read all instructions before using the fan heater.
2. Only connect the fan heater to a single-phase socket with a main voltage as specified on the
rating plate.
3. Do not leave your home while the appliance is in function: ensure that the switch is in OFF(0)
position and the thermostat is in minimum position. Always unplug the appliance.
4. Keep combustible materials such as furniture, cushions, bedding, paper, clothes, curtains etc. at
least 100cm away from the fan heater.
5. In case of wall mounting do not fix on combustible materials such as wood, synthetic or plastic
surface. Do not hang anything on or in front of the fan heater.
6. Keep the air inlet and outlet free from objects: at least 1m in front and 50cm behind the heater.
7. Do not install the heater directly below a socket.
8. Always unplug the heater when not in use. Do not pull the cord to unplug the heater.
9. Do not let animals or children touch or play with the fan heater, Pay attention to the air outlet
gets hot during operation (more than 80℃ , or 175℉ ).
10. WARNING: In order to avoid overheating, do not cover the heater.
11. Do not use the fan heater in places with explosive gas or while using inflammable solvents,
varnish or glue.
12. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
13. If the cord of this appliance is damaged discontinues use if this product and contact the
manufacturer for further instructions.
14. Always keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust
openings as this may cause electric shock, or fire or damage to the heater.
If the products need repair, please contact an authorized technical center or our company directly
so as to arrange the repair.

INSTALLATION

The appliance requires no installation, it should be used solely as a portable appliance. Portable
appliances are not suitable for use in a bathroom

OPERATION

1. Thermostat
Turn the thermostat knob (right) in a clockwise direction until it reaches the maximum setting.
-
Turn the thermostat knob off, switch it on while the heater is in operation.
-
Summer-time use (ventilation only): turn the knob to the setting with the fan symbol
-
Heating at half power: turn the button (right)to setting
-
Heating at full power: turn the button (right) to setting
-
Switching off: turn the knob (left) to setting
-
2. Timer
At the center of the timer you can find a 3 position slide switch.
In the central position (denoted by the clock symbol) the timer will switch
the heater on and off at the time set by the segments
(see setting the timer, below).
The position denoted by the "I", is a timer continues to run but no power
is supplied to the heater.
The position denoted by the "0", is switching off the power supply
.
(1000W).
Ⅰ
(2000W).
Ⅱ
0