Customizing The Hot Keys - BenQ XL Series User Manual

Depending on the operating system on your PC, different procedures should be followed to adjust the screen
refresh rate. Refer to the Help document of your operating system for details.
b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to
144 Hz / 240 Hz. Refer to the Help document that came with your game for details.
To check if the screen refresh rate has been changed, select
on your monitor, and go to
should be 144 Hz / 240 Hz.
Resolution
If 144 Hz / 240 Hz is not available in your menus, check the following:
• make sure the HDMI 2.0 cable or DisplayPort cable is properly connected to your computer and the monitor
• make sure your GPU supports 144 Hz / 240 Hz
• make sure your game supports 144 Hz / 240 Hz.
2. Select an appropriate game mode for your game.
RTS games. For more game modes, please see
40.
3. Adjust the brightness of your display. See
4. Adjust the brightness of the black shades by
44.
5. Adjust the monitor height. See
Due to graphic limitation on some of the graphic cards, the headphone jack on the monitor may not output audio
signal. To output audio signal in this case, please use the headphone jack on the PC.

Customizing the hot keys

The left 3 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions
for these keys.
1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu.
2. Select
(Menu)
3. Go to and
System
and
System
Adjusting the monitor height on page
to access the main menu.
.
Custom Key
Menu
. The refresh rate in
Information
is for FPS games, while
FPS
Setting up your own game mode on page
Brightness on page 47.
. See
Black eQualizer
from the hotkey menu
Current
is for
RTS
Black eQualizer on page
21.
How to adjust your monitor 39