Figure 27. Separate the function board cable from the function board
Go to
https://support.lenovo.com/partslookup
replacement parts:
Function board
Function board cable
Remove the ToF module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 26
"Remove the EDP cable" on page 28
"Remove the battery pack" on page 28
Step 1.
Disconnect the ToF cable from the system board and then remove the ToF board module.
Figure 28. Disconnect the ToF cable from the system board and remove the ToF board module
Step 2.
Separate the ToF cable from the ToF board.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
37