Figure 15. Remove four screws and then remove the heat sink
Screw specifications
M2 x L2
Go to
https://support.lenovo.com/partslookup
part:
Heat sink
Remove the front camera and rear camera
Make sure the following FRU (CRU) has been removed.
"Remove the LCD module" on page 26
Step 1.
Peel off the tape. Detach the front camera and rear camera connectors and then remove the front
camera and rear camera.
Figure 16. Remove the front camera and rear camera
Go to
https://support.lenovo.com/partslookup
replacement parts:
Rear camera
Front camera
Remove the Wi-Fi module
Make sure the following FRUs (or CRUs) have been removed.
32
Hardware Maintenance Manual
Number of screws
4
to look up the Lenovo part number of the following replacement
to look up the Lenovo part numbers of the following