Cisco HWIC-3G-GSM Configuring page 40

debug cell-hwic firmware
debug cell-hwic firmware
To see the Cisco IOS firmware information, use the debug cell-hwic firmware command in EXEC
mode.
Syntax Description slot/wic_slot/port
Command Default
None
Command Modes
EXEC
Command History Release
12.4(11)XV
12.4(15)T
12.4(22)YB1
Usage Guidelines Use this command for debugging purposes only.
Related Commands Command
debug cellular messages async
debug cellular messages data
debug cell-hwic driver
debug cellular messages
management
debug cellular messages dm
debug cell-hwic virt-con
Configuring the 3G Wireless High-Speed WAN Interface Card for Cisco 1841, 1861, and 2800 and 3800 Series Routers (HWIC-3G-GSM and
40
Configuring the 3G Wireless High-Speed WAN Interface Cards for Cisco 1841, 1861, and 2800 and 3800 Series Routers
debug cellular slot/wic_slot/port firmware
Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command was integrated into Cisco IOS Release 12.4(22)YB1.
Description
Debugs cellular async.
Prints Cisco IOS data path debug messages.
Debugs the Cisco IOS driver.
Prints management path messages, such as CnS.
Prints diagnostics monitor (DM) messages from the Qualcomm
CDMA chipset.
Redirects the Nios II console driver messages to display them in the
Cisco IOS router console environment.