How To Configure The 3G Hwic - Cisco HWIC-3G-GSM Configuring

Configuring the 3G Wireless High-Speed WAN Interface Cards for Cisco 1841, 1861, and 2800 and 3800 Series Routers

How to Configure the 3G HWIC

To configure the 3G HWIC, follow these procedures:
•
•
Data Account Provisioning
To provision your modem, you must have an active wireless account with a service provider and a SIM
Note
card installed in your 3G HWIC.
To provision your data account, follow these procedures:
•
•
Verifying Signal Strength and Service Availability
To verify the signal strength and service availability on your modem, use the following commands in
privileged EXEC mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
Configuring the 3G Wireless High-Speed WAN Interface Card for Cisco 1841, 1861, and 2800 and 3800 Series Routers (HWIC-3G-GSM and
Data Account Provisioning
Data Call Setup
Verifying Signal Strength and Service Availability, page 13
Configuring a Modem Data Profile, page 14
show cellular network
show cellular radio
show cellular profile
show cellular security
show cellular all
How to Configure the 3G HWIC
13