Advertisement
2. Names and Functions
Front Panel
POWER
ACT
1
2 3 4 5
1
POWER LED (Green)
Lights up when power is turned on.
2
ACT LED (Green)
Lights up when operation is possible upon
startup.
3
PLAY LED (Green)
Lights up when playing back video and
audio.
4
REQ LED (Orange)
Lights up when a request such as HTTP/
RTSP is sent out using the remote con-
trol.
5
ERR LED (Red)
Lights up when internal processing error
occurs.
6
LINK LED (Green)
Lights up when network is properly con-
nected.
4
PLAY
REQ
ERR
DM-ND300E MPEG-2 NETWORK DECODER
LINK
100M
FDX
TX
6 7 8 9 0 ! @
7
100M LED (Green)
Displays the connection speed of
network.
Light On: 100 Mbps; Light Off: 10 Mbps
8
FDX LED (Green)
Displays the duplex mode of network.
Light On: Full duplex; Light Off: Half du-
plex
9
TX LED (Orange)
Lights up when packets are transmitted
from the Ethernet.
0
RX LED (Orange)
Lights up when packets are received from
the Ethernet (including packets to other
destinations).
!
COL LED (Red)
Lights up when collision occurs on the
Ethernet.
@
Remote Control Sensor
Infrared sensor of the remote controller.
Please refer to 'Operating the Remote
Controller' on P. 7 for uses and precau-
tions pertaining to the remote controller.
RX
COL
Advertisement
